whecable.blogg.se - Canon mp250 scanner error e31

There may be a paper jam, check the printer thoroughly for any small pieces still stuck inside. One or both of the cartridges may have failed electrically, and need to be replaced. It could be that one or both of the cartridges are not inserted into the printer correctly.

The Canon MP250 can display this error for a few reasons. Change each cartridge in sequence until the error clears, this should help you identify which cartridge is causing the problem. Having some old cartridges around can be handy in this case. Remove both cartridges and then insert them again. This error is shown when there is a fault with one of the cartridges. It is quite easy to put an object on top of the printer only for it to fall in to the printer accidentally. It may not be paper that is causing the jam. Have a really good look inside to see what is still stuck. Small pieces of paper can get caught inside the printer mechanism if you had to rip the paper out of the machine. This error is normally the result of a paper jam. Error 5B00 - The waste ink absorber is full.Error P07 - The waste ink absorber is full.Error E15 - The Cartridge cannot be recognised.Error E14 - The Cartridge cannot be recognised.Error E13 - The remaining ink level cannot be detected.Error E08 - Ink absorber is almost full.Error E07 - Cartridge is not installed in the correct position.Error E05 - The Cartridge cannot be recognised.Error E04 - The Cartridge cannot be recognised.

Error E03 - Paper jam or output tray is closed.

Error E02 - The machine is out of paper or will not feed.

The led screen on the printer will flash a letter E and will then be followed by two numbers: If the printer displays an error message, the following information should help to diagnose the problem. If the alarm light is on (lightning bolt in a triangle) it should be accompanied by an error code. A B LED light denotes that the black ink cartridge is running low.Ī C LED light denotes that the colour ink cartridge is running low.